 ModemHelp.Net Recommends: Click here to run a Free driver update scan
Siemens (Formerly Efficient Networks) - Speedstream 5250
Guides, Specs, and Important URLs:
DSL Type: SDSL
Manufacturer's Website: http://www.siemens.com
Screenshots: N/A
Modem Configuration Page Address(es): N/A
Modem Default IP Address(es): N/A
ATM OAM Loopback cell (ATM Ping): This modem does respond to ATM pings (Indicated on ATM light)
Connection Types:
- Ethernet
- NOTE: Uses a RJ-45 straight-through cable between the modem and the wall jack instead of an RJ-11 cable
Status Lights:
- SYS
- Off - Power cable is unplugged or plugged in non working electrical outlet
- Solid Green - Modem has power
- Blinking Green - Modem is POSTing
- Solid Yellow - Modem is attempting to connect at 192 Kbps
- Solid Red - The modem has encountered a hardware failure
- ATM
- Off - Modem has no power, is self testing, or a DSL Line error has been detected
- Solid Green - The modem has detected ATM
- Blinking Green - ATM traffic
- Solid Yellow - Modem is attempting to connect at 384 Kbps
- DSL
- Off - Modem has no power or the modem is self testing
- Solid Green - The modem is synchronized
- Blinking Green - Searching for a DSL signal
- Solid Yellow - Modem is attempting to connect at 768 Kbps
- Solid Red - No DSL signal found, or a configuration error has occurred
- ENET
- Off - A computer was not detected as being connected via Ethernet
- Solid Green - A computer was detected as being connected via Ethernet
- Blinking Green - A computer was detected as being connected via Ethernet and is currently sending/receiving data
- Solid Yellow - Modem is attempting to connect at 1152 Kbps
- Solid Red - The modem has encountered link errors
Misc Notes:
N/A
|
