 ModemHelp.Net Recommends: Click here to run a Free driver update scan
Siemens (Formerly Efficient Networks) - Speedstream 4060
Guides, Specs, and Important URLs:
DSL Type: ADSL
Manufacturer's Website: http://www.siemens.com
Screenshots: N/A
Modem Configuration Page Address(es): N/A
Modem Default IP Address(es): N/A
ATM OAM Loopback cell (ATM Ping): N/A
Connection Types:
Status Lights:
- Single LED
- Off - Computer is powered off, no DSL line was detected, or the drivers are not installed
- Solid Yellow - Powering up and/or firmware is being downloaded
- Blinking Yellow - Modem is in maintenance state, this occurs with a new firmware download or during factory testing
- Solid Green - Modem is functional, ADSL line is connected, and ATM cell delineation is present
- Blinking Green - Modem has passed Power-on Self Test (POST), and the ADSL line is attempting to train
- Blinking Yellow/Green - Modem has passed Power-on Self Test (POST), and the modem is looking for tone on the ADSL line
- Solid Red - Hardware failure
Misc Notes:
Setup Information
- The Windows 95/98 Network Control Panel should contain the following components:
- Client for Microsoft Networks
- Dial-up Adapter (sometimes required)
- ENI 4060 SpeedStream (02) RFC 1483 Ethernet PVC Client
- TCP/IP -> Dial-up Adapter
- TCP/IP -> ENI 4060 SpeedStream (02) RFC 1483 Ethernet PVC Client
|
